Gear Couplings

Buy Best-in-Class Gear Coupling at Emechmart

Couplings act as connecting components between any two shafts. Attachment complexity, transfer strength, and scope all play an important role in attachment type collection. Gear couplings at Emechmart fall under the heading of gear type coupling and can relay extremely high torques. You can find many more types of gear couplings at our online store.

A gear coupling, often referred to simply as a gear coupling, is a form of coupling that is often used in high-torque, high-power applications. Gear couplings can generally withstand more torque than universal joints, while universal joints generate less vibration. A fenner gear coupling consists of two hubs with external and internal teeth and a one- or two-piece sleeve.

Emechmart offers gear coupling alignment capability of 0.01–0.02 inches in parallel and 2 degrees in angular. These are sometimes used in pairs with spacer shafts to bridge the gap between driving and driven machinery, but some nylon gear coupling is designed for light duty that use lubricant-free nylon or other polymers for the center sleeve. Emechmart is connect with certified gear coupling manufacturers, to deliver robust quality of the products.

Gear Couplings Types available at Emechmart

Different types of gear couplings are important because they all make up gear couplings but in different machines. The gear motor coupling is designed to deliver high torque and has a seat with a type of gender coupling. There are several types of gear couplings available at Emechmart depending on the application. Emechmart offers types of gear couplings are used in different types of machines, such as:

Full gear coupling

Double Engagement Forged Steel Couplings are full gear coupling and are used in most industrial applications. The gear tooth coupling has a large end float capacity and can compensate for both parallel (offset) shaft misalignment and angular misalignment.

Half gear half rigid coupling

Emechmart offers half gear coupling which is composed of a flexible and rigid couplings. An open half is a regular half coupling consisting of an outer sleeve and an inner hub, while a rigid half has a flanged hub.

Rigid coupling

A type used for connecting aligned shafts. Among the gear coupling types, rigid coupling is the simplest type. Rigid couplings are used where precise shaft alignment is required; The misalignment of the shaft can affect the performance of the coupling as well as its existence.

Floating shaft assembly

This makes for long distance shaft connections. If you have an application that requires to run a fan 15 feet away but there is no room to install a connecting shaft support, a gear flexible coupling assembly is a good solution.

Shear pin couplings

Shear pin couplings are suitable for applications that frequently overrun or clog. When the pin inside the coupling breaks, the tool stops working. It prevents damage by shutting down the machine as the load becomes dangerously high.

Disconnect coupling

These are similar to elecon gear coupling in that they can be easily disconnected depending on the case. Disconnect couplings are suitable for both medium and high-speed applications.

Flange Gear Coupling

Flange gear couplings consist of a short sleeve that is enclosed by a vertical flange. For each pole, a sleeve is placed so that the two flanges meet face to face.

Continuous Sleeve Gear Coupling

The continuous gear coupling sleeve have shaft ends that are fused together and locked against each other before being attached into a sleeve.