Filters

Buy Affordable Industrial strainers and filters from Emechmart

The industrial filters and strainer allow for straining and filtering a wide variety of liquids and retain solids of almost any size. All baskets are easily removable and easy to clean. Industrial strainer filter elements can be offered in single cylinder, double cylinder, multi cylinder and pleated designs depending on the application requirement. They are constructed with filter housing, filter element supported with perforated cage, positive sealing arrangement to avoid selection of any bypass and end connections.

Utilities of Strainer and filter

Unfiltered fluid enters and passes through the basket housing for filtration. Solids are kept inside/outside the basket depending on the design and are removed when the unit is serviced. It is available with an inside backwashing system, which does not require frequent removal of the basket for cleaning.

The filter and strainer are usually supplied with a spring arrangement on top of the filter element. This will ensure any bypass and confirm the position of the basket, even in case of reverse flow. Fluid bypass around the basket is prevented by an optional O'-ring seal between the rim of the basket and the inside diameter of the housing.

Features of highly efficient strainers

·   A wide-area, heavy-duty basket

·   Low pressure drops

·   The housing is permanently piped

·   Covers are O'-ring sealed

·   Carbon steel or stainless steel (304 or 316) housing

·   Easy to clean

·   Alternative to backwashing

·   Filtration ratings from 5 micron to 2000 micron and more are available

·   ASME code stamp available

·   Higher pressure rating designs are available.

·   Flow rates up to 2000 m3/hr and more.

High temperature and high-pressure designs are available

A range of industrial strainers are designed for ease of operation and maintenance. They are easy to disassemble and clean without tools, allowing quick and efficient production line changeovers, therefore increasing productivity. The units fit neatly into existing production lines, providing significant filtration capacity without requiring excessive space.

Liquid filters for sanitary applications

The high-specification Filter is designed for optimal cleaning, meeting the demands of the food and pharmaceutical industries where product quality cannot be compromised.

High temperature filtration up to 250 °C (480 °F).

High temperature in-line filter High temperature filter for filtering liquids up to 250°C. Fully enclosed filtration of high temperature liquids such as resins and cooking oils for operator safety. Fitted with offset drive, self-cleaning wiper system and heating jacket.

High flow purification filter

The largest filter in the range, suitable for high flow applications such as flow or water filtration, provides precise filtration levels down to 25 microns and achieves flow rates of up to 200,000 l/hr (50,000 g/hr) while providing consistently high product quality.

Automatic filtering

The application monitors self-cleaning in-line filters in filter management systems. Continuously monitor and control fluid filters without operator involvement, resulting in reduced labour costs and increased productivity.

Diverse designs available at Emechmart

Typically designed for a free flow area through the screen, 4 - 6 times the pipe flow area. A pleated element design is available for low-pressure drop and high dirt holding, besides, you can also find different designs based on cylinders.

·   Single cylinder design

·   Double cylinder design

·   Multi cylinder design